Nanoprotech

 

100% Anti-corrosion and electrical protection for home, for car industry, for the weapon for bicycles

NANOPROTECH
100% Anticorrosion and Electrical protection



FOR MORE INFORMATON VISIT:
www.nanoprotech.bg

   GPS control

   
  The GPS is designed to determine the position of moving objects all around the globe at any time and in any weather conditions. GPS makes it possible to continuously determine the coordinates of moving objects and their speed as well as the exact time with regard to any point in the world.
More...
 
  GPS monitoring system applications?

 

Cargo
vehicles

Bus
vehicles

Courier
vehicles

Farm transport vehicles

Railway
vehicles

Firm
vehicles

Construction
vehicles

Incaso
vehicles

FOR MORE INFORMATON VISIT:
www.trafficcontrol.bg

    GPRS communicator Z1/P

 

 
GPRS комуникатор Z1/P

Fig.1

  Intended use

   GPRS communicators Z1 / P, Z1, Z8 , and TTC only be used by system EFIR 4 . Ether 4 system was developed by the development team of ''Technopol Ltd.", for the construction and use of modern centralized monitoring center. Communication terminals with the center is based on modern methods that emerged in recent years , namely GPRS and Internet. As a result of the global communication advances, traditional radio began to give way to new communication methods developed most actively by the mobile operators. Security when using GPRS and the Internet at the moment is almost equal to the security of using his conventional radio network for security purposes.


 
Information sent by SMS
 

O/C input
AL input
AC input
from power supply
for the output
test
 

   - admitted opening / closing
   - general alarm sent from the object / resetting
   - 220V AC available / not available
   - low recharged 12V batteries
   - after output mode resetting
   - internal signal sent by the module at intervals of
     1
÷240 hours

   Information sent by notification calls
 

alarm
for the output
 

   - notification calls to not more than 4 phone numbers
   - notification calls to not more than 4 phone numbers to
     acknowledge receipt of a command

   Controllable Output 

 OUT output
 
  - impulse output (by notification calls)
  - trigger (by SMS)

   Programming of the functions

Programming of functions


 
   1.Initially done by using a PC + software
   2.Henceforth, done remotely by SMS and special
      commands
   3.ON/OFF options for any function in the module to
      reduce costs.

   Technical specifications

Supply voltage
Power consumption
Dimensions


Weight
Antenna connector type
 
  - 13.8V DC (10V DC - 15V DC) stabilized
  - 25mA ÷ 30mA regular, up to 500mA at peaks - power
    consumption depends on GSM modem operation time
    in the net
 
  -140mm/55mm/30mm
  -0,100kg (Without antenna)
  -SMA

 

 

BACK


Order

 
 
   

© 2010 Technopol LTD. All rights reserved.